 |
|
 |
 |
| Subiectul anterior :: Subiectul urmator |
| Autor |
Mesaj |
nelupet
Administrator
Data inscrierii: 11/Ian/2009
Mesaje: 355
Localitate: timisoara
|
 Trimis: 02/07/2009 18:34 Titlul subiectului: Diagnose 4.1 |
|
|
These programs run on a PC and communicate with the interface. They will run on most computers which have a serial port. (Some PCs only have USB ports, but you may be able to use a USB/serial convertor cable) The programs can also run in a "simulated" mode even if there is no serial port, interface, or vehicle attached. This allows you to examine the program or learn how it works. The programs are free, and they are full versions, not Demos; they will work with BR interfaces.
Features:
* Monitors general Obd-2 data: Fuel system (open/closed loop status), Engine load, Coolant temperature, Manifold Pressure, Engine Rpm, Vehicle speed, Timing advance, Intake air temperature, Intake air flow rate, Throttle position, Secondary air status.
* Numeroase display modes; Digital, graph, or gauge style displays.
* Selectable units; Metric or English (U.S)
* Oxygen sensor Voltage / Current and Fuel trim plots. Works with conventional or wideband sensor types.
* On-board test results (also called Obd2 readiness); Indicates whether each test category or subsystem test has been completed (passed). Often used as a criterion in emission testing.
* On board tests (detailed report); Numeric values of individual test IDs that the vehicle has performed with test limits.
* Freeze frame; Standard data stored by the vehicle at the instant it set a diagnostic trouble code (DTC).
* Diagnostic trouble code reader; Displays "P" codes, including manufacturer specific codes reported under mode 3.
o Automatic or manual code definition lookup (all standard Obd II codes and most manufacterer specific dtc).
o Ability to enter any arbitrary code for lookup purposes.
o Ability to periodically poll for active trouble codes and malfunction indicator lamp status while simultaneously monitoring other types of data.
* Pending trouble codes: These are similar to normal trouble codes, but they are set after a single driving cycle, and usually before the check engine light is illuminated. Useful after repair work has been finished.
* Clear function; Requests vehicle to clear its diagnostic trouble codes, on board test results, and freeze frame data.
* DataLogger; Optionally records and reads back most raw data on disk drive.
o Timetag option to periodically insert computer time into data stream.
o Place Markers can be inserted into file to facilitate locating the same position later.
o Playback functions: Sequential (single step or continuous), Jump to record numbers or place markers, rewind.
* Printout; Option to send most data to the default system printer.
* Mileage monitor; Computes miles per gallon (instantaneous and averaged) as well as cumulative fuel used and distance travelled. Currently calibrated for gasoline engines only.
* Simulate mode; Runs without interface attached. Useful to explore and become familiar with the program.
http://rapidshare.com/files/199847253/DIAGNOSE_4.1axim.rar |
|
| Sus » |
|
|
|
|
|
Nu puteti crea un subiect nou in acest forum
Nu puteti raspunde in subiectele acestui forum
Nu puteti modifica mesajele proprii din acest forum
Nu puteti sterge mesajele proprii din acest forum
Nu puteti vota in chestionarele din acest forum
|
|
 |
|
|
 |
|
